BT Inverter Remote

By Control House

 

The BT Inverter Remote turns your Android device into a wireless remote. Operation is possible from 33 feet away though much greater distances have been acheived. It will work with any inverter that allows dry contact closure to enable. The IT Inverter Remote has a dry contact rated at up to 1 amp for this use. If the inverter uses a different type of remote such as a smart remote with serial or other type communication control, the BT Inverter Remote will not work unless the inverter also can be switched with some type of hardware remote port or ignition lockout. Below you will find a list of inverters known to be compatible. Keep checking as additional inverters will be listed as they are discovered.

Table of known compatible inverters.
Manufacturer Known Model #'s Description of connections
WFCO WF-5110HP Connect using inverter remote port
Xantrex Freedom HFS (all models)
PROwatt SW (all models)
Freedom Xi (all models)
Freedom HF (all models)

Should work with any model with ignition lockout feature - see inverter manual
Connect using INV terminals on BT Inverter Remote
+12V to one INV terminal, the other
INV terminal to the inverter ignition lockout wire. Some models may have the inverter ignition lockout available through the Xantrex remote.
NOTE: You may need to purchase the proper inverter remote to use the BT Inverter Remote.
Samlex America PST-3000-12
Remote Port: Allowing the use of any 2 wire switch
to turn the inverter
ON and OFF.
Ex. Toggle switch or light switch. - see inverter manual
Connect using INV terminals on BT Inverter Remote
KISAE TECHNOLOGY MW1210, MW1215, SW1210, SW1220 Connect using inverter remote port
Cobra All CPI model inverters Connect using inverter remote port
Go Power GP-SW-150, GP-SW-300,
GP-SW-600, GP-SW-1500,
GP-SW1000, GP-SW2000,
GP-SW3000, GP-HS1500

Works on any model with The Hardwire Remote Port: Allowing the use of any 2 wire switch to turn the inverter ON and OFF. Ex. Toggle switch or light switch. - see inverter manual
Connect using INV terminals on BT Inverter Remote
Magnum Energy ME Series
MS Series
MSH-M Series
MSH-RE Series
MS-AEJ Series
MS-E Series
RD Series
RD-E Series
Connect using inverter remote port into Stack Port of the Inverter
See BT Remote instructions for picture
AIMS Power PWRIG200012120S
PWRIG300012120S
PWRIG500012120S
Connect using INV terminals on BT Inverter Remote to remote switch connector supplied with the inverter. See the inverter manual
AIMS Power PWRI100012S
PIC100012120S
PWRIX120012S
PWRIX120012SC
PWRINV1250W
PWRIC150012W
PWRI150012S
PWRI150024S
PWRI150048S
PWRINV200012W
PWRI200012120S
PWRINV250012W
PWRINV250024W
PWRI300012120S
PWRINV500012W
PWRINV500024W
PWRINV500036W
PWRINV500048W
PWRINV5K24012W
PWRI5K22050
PWRINV8KW12V
PWRI8K22050
PWRINV10KW12V
PWRINV12KW24V

Connect using inverter remote port
PowerDrive Inverters RPPD1000, RPPD1500, RPPD2000 Connect using inverter remote port
Outback Power FX2012T
FX2424T
FX3048T
FVX2812
FVX3524
FVX3648
Any Model with remote switch control capability
Connect using INV terminals on IntelliVerter
See Owners Manual
Various - See Known Model column
Works on any model with a Hardwire Remote Port: Allowing the use of any 2 wire switch to turn the inverter ON and OFF. Ex. Toggle switch or light switch. - see inverter manual
Connect using INV terminals on BT Inverter Remote

We are currently investigating the use of many other inverters.

In some cases to control the inverter, you must place it in the proper mode. The same mode required for the operation of the manufacturer's remote. See your inverter owner's manual for the description of remote operation.

The BT Inverter Remote is supplied with BattStat which monitors the battery status. Voltage will be displayed on the Android Bluetooth device.

 

MOUNTING

The BT Inverter Remote should be mounted close to the inverter, within 3 feet to connect with the supplied RJ cable.

 

CONNECTION

There is a 4 position removable terminal block on the bottom of the BT Inverter Remote. Each of these pins is identified by the legend printed on the BT Inverter Remote faceplate as shown above. Please be sure to install an in-line fueseholder with a 1/2 amp fuse to protect the wiring to the BT Inverter Remote.

 

BT Remote Instruction Connection Diagram

BT Remote Instruction Sheet

Return to Products